rev.2.00 mar 10, 2006 page 1 of 7 ha17904a series dual operational amplifier rej03d0689-0200 rev.2.00 mar 10, 2006 description ha17904a series are dual operational amplifier that provide high gain and internal phas e compensation, with single power supply. they can be widely applied to control equipments and to general use. features ? wide range of supply voltage, and single power supply used ? wide range of common mode voltage, and possible to operate with an input about 0 v, and output around 0 v is available ? frequency characteristics and input bias current are temperature compensated ? low electro-magnetic susceptibility level output offset voltage vs. input interference measurement condition output offset voltage (arb. unit) 5.0 4.0 3.0 2.0 1.0 0 ? 1.0 100e+3 1e+6 10e+6 100e+6 1e+9 10e+9 input rf frequency (hz) ha17904a series ha17904 series rs ? + rs 0.01 vin ? 10 dbm rf signal source (for quasi-rf noise) vcc = +7.5 v vee = ? 7.5 v rf rf vout (= 100 ? vio) v _ improve- ment ordering information type no. application package name package code ha17904aps dip-8 pin prdp0008af-b HA17904AFP sop-8 pin (jeita) prsp0008de-b ha17904arp sop-8 pin (jedec) prsp0008dd-c ha17904at industrial use tssop-8 pin ptsp0008jc-b
ha17904a series rev.2.00 mar 10, 2006 page 2 of 7 pin arrangement ? + vout1 vin( ? )1 vin(+)1 gnd v cc vout2 vin( ? )2 vin(+)2 + ? 8 7 6 5 1 2 3 4 (top view) 1 2 circuit schematic (1/2) q 1 q 4 q 2 q 3 q 5 q 6 q 7 q 13 q 12 q 11 q 10 q 8 q 9 vout r 1 vin(+) vin( ? ) c note: if input/output terminals voltage over the absolute maximum ratings, there is possibility of mis-operation, characteristics deterioration and destruction, because of the current?s flowing to parasitic diode in ic. the input/output terminals are recommended to be protected with the clamp circuit which using the diode with low forward voltage (like schottky barrier diode) when there is a possibility for the input/output terminals voltage exceeds the absolute maximum ratings.
ha17904a series rev.2.00 mar 10, 2006 page 3 of 7 absolute maximum ratings (ta = 25 c) item symbol ratings unit power supply voltage v cc 32 v output sink current iosink 50 ma common mode input voltage v cm ? 0.3 to +v cc v differential input voltage vin(diff) v cc v output voltage vout ? 0.3 to +v cc v dip 570 * 1 sop 385 * 2 allowable power dissipation tssop p t 192 * 3 mw operating temperature topr ? 40 to +85 c storage temperature tstg ? 55 to +125 c notes: 1. ha17904aps: this is the allowable values up to ta = 50 c. derate by 8.3 mw/ c. 2. HA17904AFP/arp: these are the allowable values up to ta = 25 c mounting in air. when it is mounted on glass epoxy board of 40 mm 40 mm 1.5 mmt with 30% wiring density, the allowable value is 570 mw up to ta = 45 c. if ta > 45 c, derate by 7.14 mw/ c. 3. ha17904at: these are the allowable values up to ta = 25 c. derate by 1.92 mw/c above that temperature. electrical characteristics (v cc = +15 v, ta = 25 c) item symbol min typ max unit test conditions input offset voltage v io ? 3 7 mv v cm = 7.5v, r s = 50 ? , rf = 50k ? input offset current i io ? 5 50 na v cm = 7.5v, i io = | i i (+) ? i i (?) | input bias current i ib ? 30 250 na v cm = 7.5v power source rejection ratio psrr ? 93 ? db r s = 1k ? , rf = 100k ? voltage gain a vd 75 90 ? db r l = , r s = 1k ? , rf = 100k ? common mode rejection ratio cmr ? 80 ? db r s = 50 ? , rf = 5k ? v cm (+) 13.5 ? ? v r s = 1k ? , rf = 100k ? common mode input voltage range v cm (?) ? ? ?0.3 v r s = 1k ? , rf = 100k ? peak-to-peak output voltage v op-p ? 13.6 ? v f = 100hz, r l = 20k ? , r s = 1k ? , rf = 100k ? output source current iosource 20 40 ? ma v in + = 1v, v in ? = 0v, v oh = 10v 10 20 ? ma v in ? = 1v, v in + = 0v, v ol = 2.5v output sink current iosink 15 50 ? a v in ? = 1v, v in + = 0v, vout = 200mv supply current i cc ? 0.8 2 ma v in = gnd, r l = slew rate sr ? 0.2 ? v/ sr l = , v cm = 7.5v, f = 1.5khz channel separation * 1 cs ? (120) ? db f = 1khz note: 1. design spec.
ha17904a series rev.2.00 mar 10, 2006 page 4 of 7 characteristic curves output source current vs. ambient temperature 80 output source current iosource (ma) ambeint temperature ta ( c) 70 60 50 40 30 20 10 0 ? 20 0 20 40 60 80 v cc = 15 v v oh = 10 v input bias current vs. ambient temperature 80 input bias current i ib (na) ambeint temperature ta ( c) 70 60 50 40 30 20 10 0 ? 20 0 20 40 60 80 v cc = 15 v v cm = 7.5 v supply current vs. supply voltage 4 supply current i cc (ma) supply voltage v cc (v) 3 2 1 0 816243240 ta = 25 c 80 input bias current i ib (na) supply voltage v cc (v) 60 40 20 0 816243240 ta = 25 c voltage gain vs. supply voltage 160 voltage gain a vd (db) supply voltage v cc (v) 120 80 40 0 816243240 ta = 25 c r l = maxlmum output voltage vs. frequency input bias current vs. supply voltage 20 maximum output voltage v op - p (v) frequency f (hz) 1 k 3 k 10 k 30 k 100 k 300 k 16 12 8 4 0 v cc = 15 v ta = 25 c r l = 20 k ? 1 m
ha17904a series rev.2.00 mar 10, 2006 page 5 of 7 voltage gain vs. frequency v cc = 15v ta = 25 c r l = voltage gain a vd (db) 120 100 80 60 40 20 0 1 3 10 30 100 300 1 k 3 k 10 k 30 k 100 k 300 k 1 m frequency f (hz) v cc = 15v ta = 25 c r s = 50 ? 120 100 80 60 40 20 0 100 300 1 k 3 k 10 k 30 k 100 k 300 k 1m frequency f (hz) common mode rejection ratio vs. frequency common mode rejection ratio cmr (db)
ha17904a series rev.2.00 mar 10, 2006 page 6 of 7 package dimensions ( ni/pd/au plating ) 5 8 4 1 3 1 p 1 e d e b b a la e z c 0.89 2.54 1.27 0.48 0.40 7.4 10.6 15 0 2.79 2.54 2.29 0.31 0.25 0.19 1.30 0.56 0.5 e 1 l e c b p a e d b 3 z a 1 5.06 6.30 9.60 reference symbol dimension in millimeters min nom max 7.62 p-dip8-6.3x9.6-2.54 0.54g mass[typ.] dp-8fv prdp0008af-b renesas code jeita package code previous code a l e c 1 b 1 d e a 2 b p c x y h e z l 1 4.85 1.05 0.12 0 8 6.5 0.15 0.20 0.25 0.45 0.00 0.1 0.20 4.4 0.42 0.60 0.85 2.03 reference symbol dimension in millimeters min nom max 5.25 a 1 0.35 0.4 6.75 6.35 1.27 0.15 0.75 5 8 4 f * 1 * 2 * 3 p m x y 1 index mark e a z b e h d p terminal cross section ( ni/pd/au plating ) c b 1 1 detail f a l l note) 1. dimensions" * 1 (nom)"and" * 2" do not include mold flash. 2. dimension" * 3"does not include trim offset. e p-sop8-4.4x4.85-1.27 0.1g mass[typ.] fp-8dgv prsp0008de-b renesas code jeita package code previous code
ha17904a series rev.2.00 mar 10, 2006 page 7 of 7 5 8 4 f * 1 * 2 * 3 p m x y 1 e index mark a d z h e b p terminal cross section ( ni/pd/au plating ) c b 1 1 detail f a l l 0.75 0.10 1.27 5.80 6.20 0.40 0.34 a 1 5.30 max nom min dimension in millimeters symbol reference 1.75 1.27 0.60 0.40 3.95 0.25 0.14 0.10 0.46 0.25 0.20 0.15 6.10 8 0 0.25 1.08 4.90 l 1 z h e y x c b p a 2 e d b 1 c 1 e e l a note) 1. dimensions" * 1 (nom)"and" * 2" do not include mold flash. 2. dimension" * 3"does not include trim offset. p-sop8-3.95x4.9-1.27 0.085g mass[typ.] fp-8dcv prsp0008dd-c renesas code jeita package code previous code a l e c 1 b 1 d e a 2 b p c x y h e z l 1 3.00 1.00 0.13 0 8 6.40 0.10 0.15 0.20 0.25 0.03 0.07 0.10 4.40 0.40 0.50 0.60 1.10 reference symbol dimension in millimeters min nom max 3.30 a 1 0.15 0.20 6.60 6.20 0.65 0.10 0.805 * 1 85 e * 2 index mark 14 * 3 p m x y f a d e h z b detail f 1 1 a l l p terminal cross section ( ni/pd/au plating ) c b note) 1. dimensions" * 1 (nom)"and" * 2" do not include mold flash. 2. dimension" * 3"does not include trim offset. e p-tssop8-4.4x3-0.65 0.034g mass[typ.] ttp-8dav ptsp0008jc-b renesas code jeita package code previous code
keep safety first in your circuit designs! 1. renesas technology corp. puts the maximum effort into making semiconductor products better and more reliable, but there is a lways the possibility that trouble may occur with them. trouble with semiconductors may lead to personal injury, fire or property damage. remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placeme nt of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. notes regarding these materials 1. these materials are intended as a reference to assist our customers in the selection of the renesas technology corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to renesas t echnology corp. or a third party. 2. renesas technology corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. all information contained in these materials, including product data, diagrams, charts, programs and algorithms represents i nformation on products at the time of publication of these materials, and are subject to change by renesas technology corp. without notice due to product improvement s or other reasons. it is therefore recommended that customers contact renesas technology corp. or an authorized renesas technology corp. product distrib utor for the latest product information before purchasing a product listed herein. the information described here may contain technical inaccuracies or typographical errors. renesas technology corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies o r errors. please also pay attention to information published by renesas technology corp. by various means, including the renesas techn ology corp. semiconductor home page (http://www.renesas.com). 4. when using any or all of the information contained in these materials, including product data, diagrams, charts, programs, a nd algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. renesas technology corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. renesas technology corp. semiconductors are not designed or manufactured for use in a device or system that is used under ci rcumstances in which human life is potentially at stake. please contact renesas technology corp. or an authorized renesas technology corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerosp ace, nuclear, or undersea repeater use. 6. the prior written approval of renesas technology corp. is necessary to reprint or reproduce in whole or in part these materi als. 7. if these products or technologies are subject to the japanese export control restrictions, they must be exported under a lic ense from the japanese government and cannot be imported into a country other than the approved destination. any diversion or reexport contrary to the export control laws and regulations of japan and/or the country of destination is prohibited. 8. please contact renesas technology corp. for further details on these materials or the products contained therein. sales strategic planning div. nippon bldg., 2-6-2, ohte-machi, chiyoda-ku, tokyo 100-0004, japan http://www.renesas.com refer to " http://www.renesas.com/en/network " for the latest and detailed information. renesas technology america, inc. 450 holger way, san jose, ca 95134-1368, u.s.a tel: <1> (408) 382-7500, fax: <1> (408) 382-7501 renesas technology europe limited dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, u.k. tel: <44> (1628) 585-100, fax: <44> (1628) 585-900 renesas technology (shanghai) co., ltd. unit 204, 205, aziacenter, no.1233 lujiazui ring rd, pudong district, shanghai, china 200120 tel: <86> (21) 5877-1818, fax: <86> (21) 6887-7898 renesas technology hong kong ltd. 7th floor, north tower, world finance centre, harbour city, 1 canton road, tsimshatsui, kowloon, hong kong tel: <852> 2265-6688, fax: <852> 2730-6071 renesas technology taiwan co., ltd. 10th floor, no.99, fushing north road, taipei, taiwan tel: <886> (2) 2715-2888, fax: <886> (2) 2713-2999 renesas technology singapore pte. ltd. 1 harbour front avenue, #06-10, keppel bay tower, singapore 098632 tel: <65> 6213-0200, fax: <65> 6278-8001 renesas technology korea co., ltd. kukje center bldg. 18th fl., 191, 2-ka, hangang-ro, yongsan-ku, seoul 140-702, korea tel: <82> (2) 796-3115, fax: <82> (2) 796-2145 renesas technology malaysia sdn. bhd unit 906, block b, menara amcorp, amcorp trade centre, no.18, jalan persiaran barat, 46050 petaling jaya, selangor darul ehsan, malaysia tel: <603> 7955-9390, fax: <603> 7955-9510 renesas sales offices ? 200 6. re nesas technology corp ., all rights reser v ed. printed in ja pan. colophon .6.0
|
